HIKVISION DS-K1T805EBFWX - 8.6 Configuration

Click Save to save the sengs.
8.5 Search Event
Click Event Search to enter the Search page.
Figure 8-2 Search Event
Enter the search condions, including the event type, the employee ID, the name, the card No., the
start me, and the end me, and click Search.
The results will be displayed on the right panel.
8.6
Conguraon
8.6.1 View Device Informaon
View the device name, language, model, serial No., version, IO input number, IO output number,
local RS-485, number of alarm input, number of alarm output, device capacity, etc.
Click
Conguraon → System → System Sengs → Basic Informaon to enter the conguraon
page.
You can view the device name, language, model, serial No., version, IO input number, IO output
number, local RS-485, number of alarm input, number of alarm output, device capacity, etc.
8.6.2 Set Time
Set the device's me zone, synchronizaon mode, server address, NTP port, and interval.
Click Conguraon → System → System Sengs → Time Sengs .
Click Save to save the
sengs aer the conguraon.
Access Control Terminal User Manual
25