HIKVISION DS-K27 Series User Manual

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows
mulple persons access the door or other authencaon acons.
Duress Code
The door can open by inpung the duress code when there is duress. At the same me, the
client can report the duress event.
Super Password
The
specic person can open the door by inpung the super password.
Dismiss Code
When the alarm is triggered, you can enter the dismiss code to dismiss the alarm.
Note
The duress code and the super password should be dierent.
Set Authencaon Parameters
You can enter the authencaon parameters page from the following 2 methods:
1. Click Access Control → Access Point Management . Hover the mouse on the card reader and
click
to enter the authencaon parameters page.
2. Click Access Control → Conguraon → Authencaon Parameters .
Click Save to save the
sengs aer the conguraon. Click Copy to to copy the card reader's
parameters to other card readers.
Note
The funcons vary according to dierent models. Refers to the actual device for details.
DS-K27XX Series Access Controller User Manual
33

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English