HIKVISION DS-K27 Series

You can upgrade the access module. Select a local upgrade package to upgrade.
9.6.3 Area Management
Aer you create an area, you can add access control points to the area to manage them in a
paron.
Steps
1.
Click Device Management → Area Management.
2.
Click + on the le side of the page, select a parent area, and create the area name.
3.
Click Save.
The added area will be listed in the selected parent area.
4.
Oponal: Edit / Delete
-
Select the area and click
to edit the informaon.
Select mulple personnel, and click Delete to delete the informaon of person in batch.
Click Clear All to delete informaon of all personnel.
-
Select the area, and click
to delete the informaon of area.
9.7 System and Maintenance
9.7.1 View Device Informaon
View the device name, language, model, serial No., version, number of channels, IO input, IO
output, RS-485, alarm output, and device capacity, etc.
Click System and Maintenance → System
Conguraon → System → System Sengs → Basic
Informaon to enter the conguraon page.
You can the device name, language, model, serial No., version, number of channels, IO input, IO
output, RS-485, alarm output, and device capacity, etc.
9.7.2 Set Time
Set the device's me zone, synchronizaon mode, server address, NTP port, and interval.
Click System and Maintenance → System
Conguraon → System → System Sengs → Time
Sengs .
DS-K27XX Series Access Controller User Manual
53