HIKVISION DS-K27 Series

Import
Click and select the le to import. Click Import to start import conguraon le.
Device Debugging
You can set device debugging parameters.
Steps
1.
Click System and Maintenance → Maintenance → Device Debugging .
2.
You can set the following parameters.
Enable SSH
To raise network security, disable SSH service. The
conguraon is only used to debug the
device for the professionals.
Print Log
You can click Export to export log.
Capture Network Packet
You can set the Capture Packet Duraon, Capture Packet Size, and click Start to capture.
Log Query
You can search and view the device logs.
Go to System and Maintenance → Maintenance → Log .
Set the major and minor type of the log type. Set the start me and end me for searching, and
click Search.
The results will be displayed below, which including the No.,
me, the major type the minor type,
the channel No., the local/remote user
informaon, the remote host IP, etc.
9.7.14
Cercate Management
It helps to manage the server/client cercates and CA cercate.
Note
The funcon is only supported by certain device models.
Create and Import HTTPS Cercate
Steps
1.
Go to Maintenance and Security → Security →
Cercate Management .
2.
In the HTTPS Cercate area, click Create Cercate Request.
DS-K27XX Series Access Controller User Manual
68