HIKVISION DS-K3G411 Series - Page 29

Interface Name Terminal Name Descripon Remark
BZ1 Card Reader Buzzer
Control Output
W1_1 Wiegand Reading Data
Input Data1
W0_1 Wiegand Reading Data
Input Data0
GND Grounding
Wiegand Card Reader
2
OK2 Indicator of Card
Reader Control Output
(Invalid Card Output)
Note
The Wiegand card
reader 1 refers to the
card reader (entering).
ERR2 Indicator of Card
Reader Control Output
(Valid Card Output)
BZ2 Card Reader Buzzer
Control Output
W1_2 Wiegand Reading Data
Input Data1
W0_2 Wiegand Reading Data
Input Data0
GND Grounding
BUS Terminal Descripon
You can connect the card reader, QR code scanner, etc. via the BUS terminal.
Table 4-2 BUS Terminal
Descripon Table
Interface Name Terminal Name Color Descripon
Lane Controller Light
Board 1
12V Red
PD_485+ Yellow RS-485+ of Light Board
Accessing
PD_485- Blue RS-485- of Light Board
Accessing
GND Black Grounding
Lane Controller Light
Board 1
12V Red 12 V Power Terminal
PD_485+ Yellow RS-485+ of Light Board
Accessing
DS-K3G411 Series Tripod Turnsle Quick Start Guide
18