Figure 7-14 Session Sengs
2.
Set Registraon Password.
3.
Set Main Staon IP and Private Server IP.
4.
Slide to enable Protocol 1.0.
5.
Click Save to enable the
sengs.
Call
Sengs
Go to Intercom → Call Sengs to enter the page.
Congure Max. Call Communicaon, Max. Message Duraon and Max. Ring Duraon, and click
Save.
Note
●
Max. call duraon between the module indoor staon and client ranges from 90 s to 120 s. The
call will end automacally when the actual calling duraon is longer than the congured one.
●
Max. message duraon ranges from 30 s to 60 s. The message will end automacally when the
actual message
duraon is longer than the congured one.
●
Max. ring
duraon ranges from 65 s to 255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the sengs page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Staon User Manual
43