Steps
1.
Click P
ermission Password to enter the
sengs page.
2.
Select Type of the password.
3.
Edit the password.
4.
Click Save to enable the sengs.
Access Control and Elevator
Before You Start
•
Mak
e sure your door
staon is in the mode of main door staon. Only the main
door staon support elevator control funcon.
•
Connecon between the door staon and the elevator controller supports
ne
twork interface.
Steps
1.
Click Access Control and Elevator to enter corresponding conguraon page.
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
24