LAN. The devices can be linked to the door staon and realize the linkage between
these devices.
Steps
1.
Click Linked Network Conguraon to enter linked network conguraon page.
Figure 3-17 Linked Network Conguraon
2.
Enter the master staon IP address, (main) door staon IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3.
Select the main door staon type from the drop-down list.
4.
Click Save to enable the sengs.
Note
•
Aer adding master staon IP Address, the linkage between indoor staon
and master staon can be realized.
•
Aer adding the door staon IP Address, the video intercom between indoor
staons of same building can be realized.
•
Aer adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor staons of dierent building, calling indoor
staon from outer door staon and video intercom between management
center and indoors.
•
Aer adding management center IP Address, the events can be uploaded to
the management center.
•
For indoor extension, only parameter about the main indoor staon should
be congured.
Network Indoor
Staon Conguraon Guide
33