Device Network Congure
In the devices network conguraon page, you can congure the network
parameters of master staons, SIP servers and management centers of the same
LAN. The devices can be linked to the door staon and realize the linkage between
these devices.
Steps
1.
Click Device Network
Cong to enter the sengs page.
Figure 3-18 Device Network Congure
2.
Select the Device Type according to your need.
3.
Set the Community No., Building No., Unit No., Floor No. and Room No.
4.
Enter the master staon IP address, (main) door staon IP address, SIP server IP
address, management center IP address, and doorphone IP address.
5.
Select the main door staon type from the drop-down list.
6.
Click Save to enable the sengs.
Note
•
Aer adding master staon IP Address, the linkage between indoor staon
and master staon can be realized.
•
Aer adding the door staon IP Address, the video intercom between indoor
staons of same building can be realized.
•
Aer adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor staons of dierent building, calling indoor
staon from outer door staon and video intercom between management
center and indoors.
Network Indoor Staon Conguraon Guide
34