HIKVISION DS-KH6320-WTE2 User Manual

Figure 3-5 System Maintenance
•
Reboot: Click Reboot and the system reboot dialog box pops up. Click
Yes to reboot the system.
•
Restore Default Sengs: Click Restore Default Sengs to restore the
default parameters. All default sengs, excluding network parameters,
will be restored.
•
Restore All: Click Restore All to restore all parameters of device and
reset the device to inacve status.
Note
all default sengs, including network parameters, will be restored. The
device will be reset to inacvated status.
•
Import Conguraon File: Click Import Conguraon File and the import
le window pops up. Select the path of remote conguraon les. Click
Open to import the remote conguraon le. The conguraon le is
imported and the device will reboot automacally.
•
Export Conguraon File: Click Export Conguraon File and the export
le window pops up. Select the saving path of remote conguraon les
and click Save to export the conguraon le.
Video Intercom Indoor
Staon Conguraon Guide
28

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm