HIKVISION DS-KH6320-WTE2 User Manual

Click Arming Informaon to enter the conguring arming informaton page and view
the arming informaon.
Figure 3-16 Arming Informaon
Click Refresh to refresh the arming informaon.
Calling Linkage
Steps
1.
Click Calling Linkage to enter the set the calling linkage page.
Figure 3-17 Calling Linkage
2.
Enable and select relays.
When the calling is incoming, the alarm you linked will be relayed.
Relay
Click Relay to enter the set relay parameters page.
Select a relay and click " " and set the relay name and output delay me. Click
Save to enable the sengs.
Click Copy to..., and select a relay you want to copy to. Click Save to enable the
sengs.
Extension
Sengs
Video Intercom Indoor Staon Conguraon Guide
37

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm