EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KH6320-WTE2

HIKVISION DS-KH6320-WTE2 User Manual

HIKVISION DS-KH6320-WTE2
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Figure 3-20 Local Network Conguraon
2.
Enter the local IP address, IP address subnet mask, gateway, port No. and HTTP
port No..
3.
Click Save to enable the sengs.
Note
The default port No. is 8000.
Aer eding the local network parameters of device, you should add the
devices to the device list again.
SIP Server Conguraon
Steps
1.
Click SIP Server Conguraon to enter the conguring the SIP parameters page.
Video Intercom Indoor
Staon Conguraon Guide
40

Other manuals for HIKVISION DS-KH6320-WTE2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH6320-WTE2 and is the answer not in the manual?

HIKVISION DS-KH6320-WTE2 Specifications

General IconGeneral
ColorYes
Speakerphone-
Connectivity technologyWireless
Voice codecsG.711u
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Display diagonal7 \
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Display technologyLCD/TFT
Product colorBlack, Grey
Operating system installedLinux
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocolsTCP/IP, SIP, RTSP
Outdoor unit includedNo
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Power consumption (typical)6 W
Weight and Dimensions IconWeight and Dimensions
Depth15.1 mm
Width200 mm
Height140 mm

Related product manuals