HIKVISION DS-KH6320-WTE2 User Manual

Figure 3-22 DNS Sengs
Congure Mobile Client Connecon
Congure Hik-Connect server parameters before viewing videos via mobile client.
Before You Start
Make sure the indoor staon connects to the network.
Steps
1.
Click Hik-Connect to enter the conguring the Hik-Connect sengs page.
2.
Enable Enable Hik-Connect.
Note
•
To enable Hik-Connect service, you need to create a vericaon code or
change the vericaon code.
•
The vericaon code should be 6 to 12 leers or numbers, case sensive.
You are recommended to use a combinaon of no less than 8 leers or
numbers.
3.
Enter the Vericaon Code and conrm the vericaton code.
4.
Click OK.
5.
Enable Custom and edit Service Address.
6.
Enter the Vericaon Code.
7.
Click Save to enable the sengs.
8.
Oponal: Click Refresh to refresh the sengs.
Group Network
Sengs
Click Group Network Sengs to enter the group network sengs page.
Video Intercom Indoor
Staon Conguraon Guide
42

HIKVISION DS-KH6320-WTE2 Specifications

General

Color	Yes
Speakerphone	-
Connectivity technology	Wireless
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Product color	Black, Grey
Operating system installed	Linux
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocols	TCP/IP, SIP, RTSP
Outdoor unit included	No
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	6 W

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm