HIKVISION DS-KIS603-P - Page 36

Steps
1.
Click Export to export the added device informaon le.
2.
Edit parameters of added devices in batch in the exported le.
3.
Click Import to pop up imporng box, and open the edited added device
informaon le.
Figure 2-13 Import Added Device Informaon
Volume Input and Output
Steps
1.
Click Volume Input/Output to enter the volume input and output page.
Figure 2-14 Volume Input and Output
2.
Slide the slider to adjust the volume input, volume output and talk volume.
3.
Click Save to enable the
sengs.
Network Indoor
Staon Conguraon Guide
30