HIKVISION DS-KV8213 - Door Contact Wiring; Exit Button Wiring

Note
•
Terminal NC1/COM1 is set as default for accessing magnec lock/electric bolt;
terminal NO1/COM1 is set as default for accessing electric strike.
•
To connect electric lock in terminal NO2/COM2/NC2, it is required to set the
output of terminal NO2/COM2/NC2 to be electric lock with iVMS-4200 client
soware.
2.2.2 Door Contact Wiring
Figure 2-3 Door Contact Wiring
2.2.3 Exit Buon Wiring
Video Intercom Villa Door Staon User Manual
9