Panic Alarm Stationļ User Manual
35
3. Edit the general information of the trigger, including name, output delay and so on.
Output Delay (0~5999s): Configure the alarm output time after the alarm being triggered.
4. Click Copy to to copy all these settings to other Zones.
5. Click Save to save the settings.
Calling Waiting Settings
Steps:
1. Click Remote Configuration > Alarm > Waiting to enter the trigger configuration interface.
2. Enter the Max. ring duration (40s to 80s)for reporting alarm to the center.
3. Enter the waiting time (10s to 60s) for the center to answer the call.
4. Click Save to save the settings.
Alarm Lamp Settings
Steps:
1. Click Remote Configuration > Alarm > Alarm Lamp Flicking to enter the trigger configuration interface.
To Next Page
Loading...
Need help?
General
