Panic Alarm Station User Manual
38
According to your requirement, check Display Name, Display Date, Display Week to display the
selected display content. Click Save to save the settings.
Editing the camera name
Editing the camera name in the Camera Name text box and click Save.
Adding custom display content
Click the right area of the check box in the Text Overlay List and enter display content in the text
box. Check the text and click Save to display the custom information.
You can drag the content to modify the location, or remove the check to cancel the display.
For the device with camera, you can set the image parameters for camera.
Click to enter the Remote Configuration page, go to Image → Picture Settings.
Picture Settings Page
Select a camera to configure the mode.
Click to enter the Remote Configuration page, go to Image → Intercom Audio.
To Next Page
Loading...
