Panic Alarm Station User Manual
59
to the default audio file.
Maintenance and Security
Reboot
Click Maintenance and Security → Maintenance → Reboot to restart the device manually.
Upgrade
Steps
Click Maintenance and Security → Maintenance → Upgrade. Click , select the upgrade file.
Click Upgrade.
Note
● When upgrading an unmatched upgrade file, the upgrade fails and remains the same as
before.
● During the upgrade process, do not power off the device.
Backup and Reset
Click Maintenance and Security → Maintenance → Backup and Reset.
Export
Click Export to export configuration file, which includes device parameters.
Restore to Default Settings
Click Restore, device parameters except for IP address will restore to default settings.
Restore to Factory Settings
Click Default, all device parameters will restore to default settings, and you need to activate
the device when you use it again.
Import Parameters
Select file and click Import, the configuration file will be imported to device.
Log
Click Maintenance and Security → Maintenance → Log, set Major Type, Minor Type and Select
Time, click Search, the query results will be shown.
Security Audit Log
Click Maintenance and Security → Maintenance → Security Audit Log, enable Log Upload Server.
Configure Log Server IP and Log Server Port, and import CA Certificate.
To Next Page
Loading...
