Panic Alarm Station User Manual
57
Calling Settings
Steps
1. Click Two-way Audio Settings → Calling Settings.
2. Configure parameters.
Call Timeout
Refers to the playing time of the call prompt tone. The range is 40 to 60 seconds.
Call Extension Time
When you press the call wait during calling the panic alarm center station, the extension time
of the prompt tone based on the maximum ringing time is call extension time. The range is 10
to 60 seconds.
3. Click Save.
Voice Prompt
Steps
1. Click Two-way Audio Settings → Voice Prompt.
2. Configure Call Waiting Tone, Reject Tone, Two-way Audio End Tone, Emergency Help Tone.
3. Enable Mute Schedule.
4. Click Mute, move the mouse over the time bar, and long press and drag the left mouse button to
draw the time period.
Figure 4-4 Mute Schedule Settings
5. Edit the time period.
Edit Time Period Length and Start/End Time
To Next Page
Loading...
Need help?
General
