Digital Video Recorder User Manual
121
Figure 8-11 Disarm Linkage Actions
When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input
settings are not configurable.
8.4 Detecting Video Loss
Purpose
Detect video loss of a channel and take alarm response action(s).
Step 1 Go to Menu > Camera > Video Loss.
Figure 8-12 Video Loss Setup Interface
Step 2 Select a Camera you want to detect.
Step 3 Set up handling method of video loss.
Check the checkbox of Enable Video Loss Alarm.
To Next Page
Loading...
