HIKVISION HWD Series User Manual

Digital Video Recorder User Manual
37
Figure 2-30 Reset Password
Step 3 Input the new password and confirm the password.
Step 4 Click OK to save the new password. Then the Attention box pops up as shown below.
Figure 2-31 GUID File Imported
Step 5 Click OK and the Attention box as below pops up to remind you to duplicate the password of
the device to IP cameras that are connected with default protocol. Click Yes to duplicate the
password or No to cancel it.
Figure 2-32 Duplicate the Password
If you want to retrieve the password when you forget it, you must export the GUID file first.
Once the password is reset, the GUID file will be invalid. You can export a new GUID file.
Refer to Chapter 17.5.3 Editing a User for reference.
2.7 Adding and Connecting the IP Cameras
2.7.1 Activating the IP Camera
Purpose
Before adding the camera, make sure the IP camera to be added is in active status.

HIKVISION HWD Series Specifications

General

Operating System	Embedded Linux
Video Compression	H.264, H.265
Video Input	4/8/16 channels
Video Output	1 HDMI, 1 VGA
Audio Output	1 channel
Network Interface	1 RJ45 10M/100M Self-Adaptive Ethernet Interface
USB Interface	2 USB 2.0
HDD Interface	SATA
Power Supply	12 VDC
Mobile Access	Hik-Connect
Encoding Resolution	1080p, 720p, VGA, WD1, 4CIF, CIF