Digital Video Recorder User Manual
153
Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up as below.
Figure 11-4 Service Terms
1) Create the verification code and enter the code in the Verification Code text field.
2) Check the checkbox of The Guarding Vision service will require internet access.
Please read Service Terms and Privacy Statement before enabling the service.
3) Scan the QR code on the interface to read the Service Terms and Privacy Statement.
4) Click OK to save the settings and return to the Guarding Vision interface.
Guarding Vision is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Guarding Vision, the Terms of Service interface pops up and you
should check the checkbox before enabling it.
Step 3 (Optional) Check the checkbox of Custom and input the Server Address.
Step 4 (Optional) Check the checkbox of Enable Stream Encryption.
After this feature is enabled, the verification code is required for remote access and live
view.
You can use the scanning tool of your phone to quickly get the code by scanning the QR code below.
To Next Page
Loading...
Need help?
General
