Network Video Recorder User Manual
42
Start Wizard Interface
Operating the Setup Wizard:
The Setup Wizard can walk you through some important settings of the NVR. If you don’t
want to use the Setup Wizard at that moment, click the Cancel button. You can also choose
to use the Setup Wizard next time by leaving the “Start wizard when the device starts?”
checkbox checked.
Click Next button to enter the date and time settings window, as shown in Figure 2-16.
Date and Time Settings
After the time settings, click Next button which takes you back to the Network Setup Wizard
window, as shown in the following figure.
To Next Page
Loading...
Need help?
General
