Network Video Recorder User Manual
43
Network Settings
Click Next button after you configured the basic network parameters. Enter the Hik-Connect
interface to configure the parameters. Please refer to Chapter 11.2.1 Configuring Hik-
Connect for detailed instructions.
Click Next button after you configured the basic network parameters. Then you will enter
the Advanced Network Parameter interface. You can enable UPnP, DDNS and set other
ports according to your need.
Advanced Network Parameters
Click Next button after you configured the network parameters, which takes you to the HDD
Management window, shown in Figure 2-19.
To Next Page
Loading...
Need help?
General
