HIKVISION KH6 Series

Steps
1.
Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap SIP Sengs in Local Informaon page.
Figure 3-14 SIP Sengs
3.
Set SIP registraon password.
1) Tap Registraon Password.
2) Create a new SIP
registraon password and conrm the password.
3) Tap OK.
4.
Set Stream Transmission Mode as Unicast or
Muicast.
5.
Oponal: Tap to enable the funcon of compable with SIP 1.0 indoor staon.
6.
Oponal: Enable standard SIP.
1) Tap to Enable Standard SIP.
2) Tap VOIP Account Sengs and congure account informaon, including the user name, the
phone number, the registered user name, the password, the domain, the port No., and the
expiraon date.
Network Indoor Staon User Manual
20