User Manual of Network Video Recorder
101
Figure 6. 17 Draw Area of Smart Search
5. Set the smart search rules.
Traversing Virtual Plane Detection
Click the button , and click on the screen to specify the beginning point and move the mouse to the end
of the plane and click again.
Intrusion Detection
Click the button, and then specify 4 points to set a quadrilateral region for intrusion detection.
Only one region can be set.
Motion Detection
1) Click the to set the search area manually, or click the button to set the full screen as the area.
2) Click and drag the mouse to draw target searching area(s).
6. Click the button to set the playback settings.
Skip the Non-Related Video: The non-related video will not be played after this function is enabled, as well
the set value of play non-related video at will be invalid.
Play Non-Related Video at: Set the speed to play the non-related video, there are Max./8/4/1 selectable.
Play Related Video at: Set the speed to play the related video, there are Max./8/4/1 selectable.
Pre-play and post-play can be configured for the Intrusion Detection type.
To Next Page
Loading...
Need help?
General
