User Manual of Network Video Recorder
120
Figure 7. 23 Export by Event Using USB Flash Drive
Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.
Figure 7. 24 Export Finished
4. Check backup result.
The Player player.exe will be exported automatically during record file export.
7.1.4 Backing up Video Clips
Purpose:
You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB
HDDs, USB writer), SATA writer or eSATA HDD.
Steps:
1. Enter Playback interface.
Please refer to Chapter 6.1 Playing Back Record Files.
2. During playback, use buttons and in the playback toolbar to start or stop clipping recording file(s).
3. Click the button to pop up the file management interface. Click the Video Clips tab to check and export
the files.
Or the promption of saving files will pop up when you quit the playback interface.
A maximum of 30 clips can be selected for each channel.
To Next Page
Loading...
Need help?
General
