EasyManuals Logo

HIKVISION PanoVu Series Quick Start Guide

HIKVISION PanoVu Series
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
PanoVu Series Camera·Quick Start Guide
iii
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. For standard of the power
adapter, please refer to the specification manual for details. The power consumption cannot be
less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the
panoVu camera.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the panoVu camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
The output of the use of external power supply should meet Limited Power Source according to
the IEC 60905-1 standard.
Cautions
Do not drop the camera or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
Do not place the camera in extremely hot, cold, dusty or damp locations, otherwise fire or
electrical shock will occur. For working temperature, please refer to the specification manual for
details.
The camera cover for indoor use shall be kept from rain and moisture.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

Other manuals for HIKVISION PanoVu Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION PanoVu Series and is the answer not in the manual?

HIKVISION PanoVu Series Specifications

General IconGeneral
BrandHIKVISION
ModelPanoVu Series
CategorySecurity Camera
LanguageEnglish

Related product manuals