PanoVu Series Camera·Quick Start Guide
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
Do not aim the panoVu camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
Please use the provided glove when open up the camera cover, avoid direct contact with the
camera cover, because the acidic sweat of the fingers may erode the surface coating of the
camera cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the camera cover, do
not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the panoVu camera to the factory with the original wrapper. Transportation
without the original wrapper may result in damage on the panoVu camera and lead to additional
costs.