HIKVISION PanoVu Series User Manual

5.
Oponal: Dene the Quota of the memory card. Input the percentage for storing dierent
contents according to your needs.
6. Click Save.
Set Encrypted Memory Card
Before You Start
• Insert an encrypted memory card to the device. For detailed
installaon, refer to Quick Start
Guide of the device.
• You need to know the correct
encrypon password of the memory card.
Steps
1. Go to Conguraon → Storage → Storage Management → HDD Management .
2. Select the memory card.
Note
If an Unlock buon appears, you need to unlock the memory card rst. See Detect Memory
Card Status for details.
3. Verify the encrypon password.
1) Click Parity.
2) Enter the
encrypon password.
3) Click OK.
When the
Encrypon Status turns to Encrypted, the memory card is ready for use.
Note
If the encrypon password is forgoen and you sll want to use this memory card, see Set New
or Unencrypted Memory Card to format and set the memory card. All exisng contents will be
removed.
4. Oponal: Dene the Quota of the memory card. Input the percentage for storing dierent
contents according to your needs.
5. Click Save.
Detect Memory Card Status
The device detects the status of Hikvision memory card. You receive
nocaons when your
memory card is detected abnormal.
Before You Start
The
conguraon page only appears when a Hikvision memory card is installed to the device.
Steps
1. Go to Conguraon → Storage → Storage Management → Memory Card Detecon .
2. Click Status Detecon to check the Remaining Lifespan and Health Status of your memory card.
Stched PanoVu Camera with PTZ User Manual
52

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English