HIKVISION PanoVu Series User Manual

It stands for the sensivity of detecng an target. The higher the value of sensivity is, the
more easily the target is detected.
Threshold
Threshold stands for the me of the object loitering in the region. If the me that object
stays in the region exceeds the threshold, the alarm is triggered.
Priority
It stands for the device response priority to the detecons. When several perimeter
detecons happen at the same me and the device resources are limited to response to all,
the one with higher priority level goes rst.
Note
For the model with 2 panoramic channels, the priority of the detecons in Camera 02 is
higher than all detecons in Camera 03.
Figure 8-10 Draw Area
6. Click Save.
7. Repeat above steps to draw other regions.
8. Set arming schedule. See Set Arming Schedule .
9. Set linkage method. See Linkage Method
Sengs .
Set Line Crossing
Detecon
Line crossing detecon is used to detect the object movement of crossing a predened line. When
it occurs, the device takes linkage acons as response.
Steps
1. Go to Conguraon → Event → Smart Event → Line Crossing Detecon .
2. Select a device channel.
Stched PanoVu Camera with PTZ User Manual
72

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English