HIKVISION PanoVu Series User Manual

Note
For the model with 2 panoramic channels, the priority of the detecons in Camera 02 is
higher than all detecons in Camera 03.
Figure 8-12 Draw Area
6. Click Save.
7. Repeat above steps to set other regions.
8. Set arming schedule. See Set Arming Schedule .
9. Set linkage method. See Linkage Method
Sengs .
Set Region
Exing Detecon
Region exing detecon is used to detect the objects movement of exing from a predened area.
When it occurs, the device takes linkage
acons as response.
Steps
1. Go to Conguraon → Event → Smart Event → Region Exing Detecon .
2. Select a device channel.
Note
Only panoramic channels support the funcon.
3. Check Enable.
4. Draw
detecon area.
1) Select a Region No.. Up to 4 regions can be set.
2) Click
Detecon Area.
3) Click on the live image to draw the boundaries of the detecon area, and right click to
complete drawing.
5. Set
detecon parameters.
Stched PanoVu Camera with PTZ User Manual
75

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English