HIKVISION Safire DS-KH8520-WTE1 User Manual

3.
En
ter the device name and IP address.
4.
Enter the password of the camera.
5.
Tap OK to add the camera.
1.2.6 Zone and Alarm Settin
Zone
Settin
You can set the zone type, alarm type and delay tim and other parameters of 8
zones.
Before You Start
Tap Settin →
→ Preference t
o enable Alarm.
Steps
Note
Arming status page and zone settin page are hidden by default. You should enable
alarm
functio fi st.
1.
T
ap Settin →
t
o enter the zone settin page.
Figure 1-8 Zone Settin
2.
Pr
ess a zone to pop up the zone editin dialogue box.
3.
Se
t the zone type, alarm type, status of arming status, entering delay, and exitin
delay.
4.
T
ap OK to save the
setting
Network Indoor Statio Configu atio Guide
7

HIKVISION Safire DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	Safire DS-KH8520-WTE1
Category	Intercom System
Language	English