Figure 1-10 Sync Time
2.
Enable Enable NTP.
3.
Se
t the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the tim zone.
Note
The default unit of synchronizing interval is minute.
1.5 Sound Settin
You can set the ringtone, ring duration call forwarding time volume of microphone
and loudspeaker, enable/disable touch sound and auto-answer functio on call
settin page.
Steps
1.
Tap Settin → t
o enter the call settin page.
Network Indoor Statio Configu atio Guide
11
To Next Page
Loading...
