HIKVISION Safire DS-KH8520-WTE1 User Manual

Note
•
Rebootin the indoor statio is required when you switch the SIP protocol
be
tween the private SIP protocol and the standard SIP protocol.
•
All linked device IP should be configu ed again afte you change the SIP protocol
type.
•
The indoor e
xtension does not support SIP sever setting
1.2.3 Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door
station doorphone, master station center, etc.), to which the indoor statio is
link
ed. Linked devices for the indoor statio refers to door station center, master
station and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices
are in the same network segment with the indoor station
With the standard SIP protocol, intercom can be realized when all these devices
support the standard SIP protocol.
Steps
Note
•
The doorphone does not support adding with the s
tandard SIP protocol.
•
Here take door statio network settin as example.
1.
T
ap Settin →
→
Configu atio →
t
o enter the device management page.
Note
Default admin password is 888999.
Network Indoor Statio
Configu atio Guide
3

HIKVISION Safire DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	Safire DS-KH8520-WTE1
Category	Intercom System
Language	English