Hillrom Connex Spot Monitor 7000 Series User Manual

WI_Delivery Assist Trng CSM - DIR 50011929 ver F_2020-12-21 2
Tool Requirements – to perform this process you will need the following:
Electrical Safety Tester – You will need to source the following Ground Stud Connector to perform this test - for Orders
with 7000-APM stands – it can be ordered in the HRC Parts-On-Line System under Alpha code DGTF
Screwdrivers - specifications for screwdrivers are noted on each installation instruction sheet.
Delivery Assist Program Entitlements
 Service offered for CIWS, CVSM and CSM - “DELIVERYASSIST-2”
 Service offered for CIWS, CVSM and CSM - “DELIVERYASSIST-INS”
Program Features
DeliveryAssist-2
DeliveryAssist-INS
Inventory goods by material number, quantity, and serial number
where applicable


De-palletize shipment


Unbox and stage product


Unbox and assemble roll stands when applicable


Unbox and assemble wall mounts when applicable


Attach device to stand or wall mount


Install hardware for wall mounting bracket on wall

Attach accessories to device (SpO2 cable, NIBP hose and cuff,
temperature sensor, power supply, barcode scanner, quick
reference card)


Affix customer-provided asset tag if required


Perform device in-service*


Dispose of waste packaging


Perform Electrical Safety and Power-on Test if required


Distribute assembled product to nursing floors if needed


Configure devices per customer requirements if needed


Provide summary report to customer


* Device in-service to be performed by Account Manager or Clinical Consultant per clinical policy
Acronyms
APM: Accessory Power Management
EST: Electrical Safety Testing
CSM: Connex Spot Monitor
QRC: Quick Reference Card
DFU: Directions for Use
SM: Service Manual

Hillrom Connex Spot Monitor 7000 Series Specifications

General

Brand	Hillrom
Model	Connex Spot Monitor 7000 Series
Category	Medical Equipment
Language	English