WI_Delivery Assist Trng CSM - DIR 50011929 ver F_2020-12-21 3
Note on reference documents
This document refers to various documents; they are listed in the reference list at the end of this document.
Some instructions are available in more than one document.
Make sure to log all actions that are part of both offerings on the summary report with a check or a pass /
fail (whatever applies)
If there is a damaged item, out of box failure or any challenges with assembly of the equipment, please
contact Technical Support.
Technical Support - Monitoring devices:
CIWS, CVSM and CSM
For Technical support during the installation, please contact: 1-315-685-4414 – select prompts 2, 1, 2
1. Inventory
1.1. Compare number of delivered devices and number of delivered mounting options with order info – Order
Acknowledgement will be emailed to the HRC Delivery Assist mailbox (deliveryassistwa@hillrom.com)
and the HRC Regional Service Operations Manager will provide you with the documentation prior to the install.
2. De-palletize
2.1. Remove all boxes from pallet(s)
2.2. Set pallet(s) aside for later disposal
3. Unbox, Stage & Damage check
3.1. Device & Accessories
3.1.1. Check box for external damage.
3.1.2. Take the monitor and the accessories from the box
3.1.3. Compare the CSM part # on the label on the back of the device with that on the pack list
3.1.4. Check housing and display for any obvious damage or scratches (take into account any damage found in
3.1.1 that may have affected the device).
3.1.5. Set box aside for later disposal
3.2. Mounting option
3.2.1. Check box for external damage
3.2.2. Take the mounting option from the box
3.2.3. Set box aside for later disposal
3.2.4. Check if all parts are present
3.2.5. Check mounting option for obvious damage (take into account any damage found in 3.2.1 that may have
affected the device).
To Next Page
Loading...
Need help?
General
