28 The MetaNeb® System Instructions for Use (174432 REV 10)
Cleaning
11. After all parts are dry, assemble the circuit, and put it in a breathable
bag with the patient’s name on it for use later.
Before the next use of the system, do these:
• Examine the nebulizer for cracks or other damage. If there is damage,
replace the circuit. See “Circuit Part Numbers” on page 43.
• Assemble the nebulizer. See “Using a Bacterial Filter In-Line with the
MetaNeb® System” on page 16.
• Do the “Pre-Use Check” on page 20.
• For units used with an in-line ventilator, do the “Pre-Use Check For In-
Line Use with a Ventilator” on page 21.