Digital Video Recorder User Manual
47
Figure 6-9 Port Settings
6.2.8 HiLookVision
Go to Configuration → Network → Platform Access. Refer to HiLookVision for details.
6.2.9 Email
Go to Configuration → Network → Email. Refer to Email for details.
6.3 Camera Management
6.3.1 Configure Signal Input
For certain digital video recorder models, you can configure the analog and IP signal input types.
Steps
1. Go to Configuration → Analog → Analog, or click Edit at the upper-right corner in Configuration
→ Camera → Camera.
2. Select signal input type as HD/CVBS or IP.
HD/CVBS
Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be
connected randomly for the channel.
To Next Page
Loading...
