*2125998*
2125998 English 11
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Fitting the belt hook (optional) 3
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself
and others.
▶ Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by
the operator. The belt hook can be fitted to allow attachment on the left
or right side of the body.
▶ Fit the belt hook.
5.3 Selecting the function 4
▶ Select the desired function.
5.4 Setting the torque 5
▶ Set the desired torque.
The torque is limited only when the power tool is set to screwdriving
mode .
5.5 Selecting the gear 6
The gear selector switch can be operated only when the motor is not
running.
▶ Select the gear.
Printed: 19.06.2019 | Doc-Nr: PUB / 5251744 / 000 / 02
To Next Page
Loading...
Need help?
General
