English 9
and/or vibration, for example: maintenance of the electric tool and the accessories, keeping the hands warm,
organization of work patterns.
Noise emission values determined in accordance with EN 60745
Sound (power) level (L
WA
)
99 dB(A)
Uncertainty for the sound power level (K
WA
)
3 dB(A)
Emission sound pressure level (L
pA
)
88 dB(A)
Uncertainty for the sound pressure level (K
pA
)
3 dB(A)
Total vibration determined in accordance with EN 60745
Hammer drilling in concrete (a
h, HD
)
11 m/s²
Uncertainty (K)
1.5 m/s²
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
Printed: 10.04.2019 | Doc-Nr: PUB / 5200339 / 000 / 03
To Next Page
Loading...
