Hilti TE 6-A36 - Insert Tools, Accessories; Technical Data

2.10 Li‑ion battery charge status
LEDs light constantly LEDs blink Charge status C
LED 1,2,3,4
-
C ≧ 75 %
LED 1,2,3
-
50 % ≦ C < 75 %
LED 1,2
-
25 % ≦ C < 50 %
LED 1
-
10 % ≦ C < 25 %
-
LED 1
C < 10 %
NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation.
If the battery charge status LEDs blink, please refer to the information given in section 9, “Troubleshooting”.
3. Insert tools, accessories
Hammer drill bits Ø 5…16 mm
Anchor-setting tools
C-type connection end
Quick-release chuck for wood and metal drill bits
With smooth shank, hexagonal shank
Keyed chuck With smooth shank, hexagonal shank
Wood drill bits Ø 3…20 mm
Wood drill bits (auger bits) Ø Max. 14 mm
Metal drill bits (for steel)
Ø 3…10 mm
TE‑C CLICK chuck
Charger for Li-ion batteries C 4/36
Charger for Li-ion batteries C 4/36‑ACS
Charger for Li-ion batteries C 4/36-ACS TPS
Battery B36/2.4 Li‑ion
Battery B36/2.6 Li‑ion
Battery B36/3.0 Li‑ion
Battery B36/3.3 Li‑ion
Battery B36/3.9 Li‑ion
Angular chuck
C-type connection end
TE DRS‑6‑A dust removal module
4. Technical data
Right of technical changes reserved.
Power tool TE 6‑A36
Rated voltage (DC voltage)
36 V
Weight in accordance with EPTA procedure 01/2003 4.0 kg
Dimensions (L x W x H) 344 mm x 94 mm x 215 mm
Drilling speed without hammering 1,010/min
Hammer drilling speed 940/min
en
4