The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
Changes or modifications to the power tool are not permissible.
Do not use the battery as a power source for other unspecified power tools.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
2.2 Chuck
TE‑C CLICK chuck
2.3 Switches
Speed control switch for smooth starting
Function selector switch
Forward / reverse switch
2.4 Grips
Vibration-absorbing, pivotable side handle with depth gauge
Vibration-absorbing grip
2.5 Protective feature
Mechanical slip clutch
2.6 Lubrication
Oil lubrication
2.7 Items supplied as standard
1 Power tool
1TE‑C CLICK chuck
1 Side handle with depth gauge
1 Operating instructions
1 Hilti toolbox or cardboard box
1 Cleaning cloth
1Grease
2.8 Additional items required for operating the tool
B 36/2.4 NiCd battery with C 7/36‑ACS charger or B 36/3.3 Li-ion battery with C 4/36‑ACS charger.
2.9 Li‑ion battery charge status
LEDs light constantly LEDs blink Charge status C
LED 1,2,3,4
-
C ≧ 75 %
LED 1,2,3
-
50 % ≦ C<75%
LED 1,2
-
25 % ≦ C<50%
LED 1
-
10 % ≦ C<25%
-
LED 1
C<10%
en
19
To Next Page
Loading...
Need help?
General
