Hilti TE 7-A - Insert Tools and Accessories; Hammer Drill Bits; Forming and Installation Drill Bits; Lightweight Percussion Core Bits

NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after
operation. Indication is given (LED 1 blinks) only when the battery is fully discharged or when it i s too hot
(temperature >80°).
3. Insert tools, accessories
Insert tools and accessories for the TE 7‑A
Hammer drill bits Ø 5to28mm
Forming and installation drill bits Ø 5to20mm
Lightweight percussion core bits Ø 25 to 68 mm
Multipurpose hole saws Ø 25 to 82 mm, hexagonal
Pointed chisels
C-type connection end
Flat chisel
C-type connection end
Shaped chisels C-type connection end
Anchor-setting tools
C-type connection end
Quick-release chuck for wood and metal drill bits
With smooth shank, hexagonal shank
Keyed chuck With smooth shank, hexagonal shank
Wood drill bits Ø 3to20mm
Metal drill bits Ø 3to13mm
Metal drill bits / stepped drill bits Ø 5to22mm
Charger C7/36-ACS
Charger C4/36-ACS
Battery
B36/2.4 NiCd
Battery B36/3.3 Li-ion
Dust module
TE DRS-M
Belt adapter (for B36/2.4 NiCd battery only)
BAP 36
Angular chuck
C-type connection end
4. Technical data
Power tool TE 7‑A
Rated voltage (DC voltage)
36 V
Weight in accordance with EPTA procedure 01/2003 4.9 kg
Dimensions (L x W x H) with Li-ion 401 mm x 111 mm x 217 mm
Dimensions (L x W x H) with NiCd and belt adapter
387mmx107mmx217mm
Drilling speed without hammering 0 to 800 r.p.m.
Hammerdrillingspeed 740r.p.m.
Single impact energy
2.6 J
en
20