EasyManuals Logo

Hilti TE 70-ATC User Manual

Hilti TE 70-ATC
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
*2244432*
2244432 Français 15
Trouble or fault Possible cause Action to be taken
Service indicator
flashes.
The product is faulty. Have the product
repaired by Hilti
Service.
Service indicator
shows.
The carbon brushes are
worn.
Have checked, and if
necessary replaced,
by a trained electrical
specialist.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Do not dispose of power tools, electronic equipment or batteries as
household waste!
10 Manufacturer’s warranty
Please contact your local Hilti representative if you have questions about
the warranty conditions.
Mode d'emploi original
1 Indications relatives à la documentation
1.1 À propos de cette documentation
Lire intégralement la présente documentation avant la mise en service.
C'est la condition préalablement requise pour assurer la sécurité du travail
et un maniement sans perturbations.
Bien respecter les consignes de sécurité et les avertissements de la
présente documentation ainsi que celles figurant sur le produit.
Toujours conserver le mode d'emploi à proximité du produit et uniquement
le transmettre à des tiers avec ce mode d'emploi.
1.2 Explication des symboles
1.2.1 Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du
produit. Les termes de signalisation suivants sont utilisés :

Other manuals for Hilti TE 70-ATC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti TE 70-ATC and is the answer not in the manual?

Hilti TE 70-ATC Specifications

General IconGeneral
Single impact energy11.5 J
Active Torque Control (ATC)Yes
Vibration reductionYes
Drilling Diameter Range (Hammer Drill Bits)12 - 40 mm
Chuck TypeTE-Y (SDS Max)
Dust Removal Module AvailableYes
Rated Voltage230 V
Impact Energy11.5 J
Power Output900 W
Voltage220-240 V
Frequency50-60 Hz
Tool HolderTE-Y (SDS Max)
Cord Length4 m
Drilling Diameter Range (Core Bits)40 - 150 mm
Working ModeHammer drilling, Drilling
Width126 mm

Related product manuals