2 English 2244432
*2244432*
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text
Item reference numbers are used in the overview illustrations and
refer to the numbers used in the product overview section
This symbol is intended to draw special attention to certain points
when handling the product.
Wear protective gloves while working with the tool.
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
Volts
Amps
Hertz
Revolutions per minute
Revolutions per minute
Diameter
Alternating current
Protection class II (double-insulated)
The product supports wireless data transmission compatible with
iOS and Android platforms.
1.4 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
To Next Page
Loading...
Need help?
General
