HIMA HIMatrix F1 DI 16 01 - Product Data and Specifications; General Product Data; Specifications for Digital Inputs; Specifications for the Pulsed Outputs

3 Product Description F1 DI 16 01
Page 20 of 42 HI 800 153 E Rev. 2.00
3.5 Product Data
General
Response time ≥ 20 ms
Ethernet interfaces 2 x RJ-45, 10BASE-T/100BASE-Tx with integrated switch
Operating voltage 24 VDC, -15...+20 %, r
PP
≤ 15 %,
from a power supply unit with safe insulation
in accordance with IEC 61131-2
Current input max. 0.8 A
Fuse (external) 10 A time-lag (T)
Operating temperature 0...+60 °C
Storage temperature -40...+85 °C
Type of protection IP20
Max. dimensions
(without plug)
Width: 152 mm (with housing screws)
Height: 114 mm (with fixing bolt)
Depth: 66 mm (with earthing screw)
Weight 0.7 kg
Table 11: Product Data
Digital inputs
Number of inputs 16 (non-galvanically separated)
High level: voltage
current input
15...30 VDC
≥ 2 mA at 15 V
Low level: voltage
current input
max. 5 VDC
max. 1.5 mA (1 mA at 5 V)
Switching point typ. 7.5 V
Switching time
250 s
Supply 4 x 19.2 V / 40 mA (at 24 V), short-circuit-proof
Table 12: Specifications for Digital Inputs
Pulsed outputs
Number of outputs 4 (non-galvanically separated)
Output voltage ≥ L+ minus 4 V
Output current approx. 60 mA
Minimum load none
Behavior upon overload 4 x ≥ 19.2 V, short-circuit current 60 mA at 24 V
Table 13: Specifications for the Pulsed Outputs
3.5.1 Product Data F1 DI 16 011 (-20 °C)
The F1 DI 16 011 (-20 °C) model variant is intended for use at the extended temperature range
of -20…+60 °C. The electronic components are coated with a protective lacquer.
F1 DI 16 011
Operating temperature -20...+60 °C
Weight approx. 0.7 kg
Table 14: Product Data F1 DI 16 011 (-20 °C)