HIMA HIMax X-DI 64 01 - Pin Assignment for Connector Boards with Cable Plug

3 Product Description X-DI 64 01
Page 24 of 52 HI 801 093 E Rev. 4.00
3.6.6 Pin Assignment for Connector Boards with Cable Plug
HIMA provides ready-made system cables for use with these connector boards, see
Chapter
3.7. The cable plug and the connector boards are coded.
i
Connector pin assignment!
The following table describes the connector pin assignment of the system cable plug.
Lead marking based on DIN 47100:
c b a
Row
Signal Color Signal Color Signal Color
1 DI64+ YE-BU
1)
DI32+ YE-BU Reserved YE
2)
2 DI63+ GN-BU
1)
DI31+ GN-BU Reserved GN
2)
3 DI62+ YE-PK
1)
DI30+ YE-PK Reserved BN
2)
4 DI61+ PK-GN
1)
DI29+ PK-GN Reserved WH
2)
5 DI60+ YE-GY
1)
DI28+ YE-GY
6 DI59+ GY-GN
1)
DI27+ GY-GN
7 DI58+ BN-BK
1)
DI26+ BN-BK
8 DI57+ WH-BK
1)
DI25+ WH-BK
9 DI56+ BN-RD
1)
DI24+ BN-RD
10 DI55+ WH-RD
1)
DI23+ WH-RD
11 DI54+ BN-BU
1)
DI22+ BN-BU
12 DI53+ WH-BU
1)
DI21+ WH-BU
13 DI52+ PK-BN
1)
DI20+ PK-BN
14 DI51+ WH-PK
1)
DI19+ WH-PK
15 DI50+ GY-BN
1)
DI18+ GY-BN
16 DI49+ WH-GY
1)
DI17+ WH-GY
17 DI48+ YE-BN
1)
DI16+ YE-BN DI- RD-BK
18 DI47+ WH-YE
1)
DI15+ WH-YE DI- BU-BK
19 DI46+ BN-GN
1)
DI14+ BN-GN DI- PK-BK
20 DI45+ WH-GN
1)
DI13+ WH-GN DI- GY-BK
21 DI44+ RD-BU
1)
DI12+ RD-BU DI- PK-RD
22 DI43+ GY-PK
1)
DI11+ GY-PK DI- GY-RD
23 DI42+ VT
1)
DI10+ VT DI- PK-BU
24 DI41+ BK
1)
DI9+ BK DI- GY-BU
25 DI40+ RD
1)
DI8+ RD S8+ YE-BK
1)
26 DI39+ BU
1)
DI7+ BU S7+ GN-BK
1)
27 DI38+ PK
1)
DI6+ PK S6+ YE-RD
1)
28 DI37+ GY
1)
DI5+ GY S5+ GN-RD 1)
29 DI36+ YE
1)
DI4+ YE S4+ YE-BK
30 DI35+ GN
1)
DI3+ GN S3+ GN-BK
31 DI34+ BN
1)
DI2+ BN S2+ YE-RD
32 DI33+ WH
1)
DI1+ WH S1+ GN-RD
1)
Additional orange ring if one lead marking color is repeated.
2)
Additional violet ring if one lead marking color is repeated for the second time.
Table 14: Pin Assignment for the System Cable Plug