Hioki 3283-20 - 2 Pre-measurement Preparation; 2.1 Flow of Measurement

19
2
Pre-measurement Preparation
2.1 Flow of Measurement
Before using the instrument, be sure to read “Operating Precautions” (p. 7)
Preparing and connecting-up
Install the battery (p. 20).
Do pre-use checks (p. 23).
(As necessary)
Attach the hand strap (p. 24).
Measuring
Turn the power on.
Clamp the conductor to be measured.
(As necessary)
Select the measurement range (p. 29).
Reduce noise (p. 35).
Ending
Turn the power off.
2 Pre-measurement Preparation