Hioki 3283-20 - 5.3 Error Displays; Error Displays; Message Displays

52
Error Displays
Problem Cause Solution
Any of [E.001] to
[E.004] is displayed
Internal memory may
be damaged.
Have the instrument
repaired (p. 52)
The jaws generate
a sound during
measurement
When large current or
high-frequency current
is measured, resonance
may occur, generating
a sound.
The loudness will depend
on the individual case,
but the sounds will not
affect the measurement.
5.3 Error Displays
Error
display
Denition Solution
[E. 001]
Checksum error in single-chip
microcomputer's internal ROM.
If any of these errors
is displayed in the LCD
display area, repair
is required. Contact
your authorized Hioki
distributor or reseller for
repair.
[E. 002]
R/W error in single-chip
microcomputer's internal RAM.
[E. 003]
EEPROM checksum error.
[E. 004]
5.4 Message Displays
Display Denition See page
Battery depleted.
Replace it with a new battery.
p.20